110V 220V EMC EMI Filter For AC Power Supply
Quick Detail:
| Item | Power line Filter |
| Model | Power line Filter VIP4 |
| Transfer Function | Low Pass |
| Package Type | Surface Mount |
| Nominal Center Frequency | 150K-30MHZ |
| Insertion Loss | 60~90dB |
| Input Impedance | 50Ω |
| Rated Voltage | 110V/250V |
| Rated Current | 0.5~300A |
| Environmental Temperature | 40°C |
| Temperature Range | 25 / 085 / 21 |
| Operating Frequency | 50/60HZ |
| Line to Line | 1760VDC |
| Line to Ground | 2200VDC |
| Maximum Leakage Current | 250VAC/60HZ 1.0mA Max |
| MOQ | 5pcs |
| Port | Shenzhen |
| Lead Time | 5~15 working days |
General purpose single phase AC power line filters ,easy to install
,available for
--Electrical and electronic equipment
-- Medical equipment
-- Building automation
-- Office automation and datacom equipment
Specifications for single phase emi filters:
General purpose AC filters with good attenuation frequency range
150KHz-30MHz
VIP4 -1A and VIP4 -1B series are one - stage commonmode filters
with almost the same filtering fleet, only slight differen
different current
Compact structure, high performance-cost ratio, easy to
install,safe and reliable
High voltage versions above 380VAC are also available
tabulates
- Rated current: 0.5A-300A
- Various terminals: wire, solder lug, stud, terminal block ,etc
Optional medical versions(H type)
Custom specific versions are available on request
| Part No. | Rated Current [A] | 250VAC/50Hz @ 20C
Leakage Current [mA] | Physical Dimensions | Electrical Schematics | Terminals | Weight [g] |
| screw | terminal block | wires |
| VIP1-1A-01 | 1A | <0.5mA | Fig 1 | Fig 1 | - - - | - - - | 0 | 65 |
| VIP1-1A-03 | 3A | <0.5mA | Fig 1 | Fig 1 | - - - | - - - | 0 | 65 |
| VIP1-1A-06 | 6A | <0.5mA | Fig 1 | Fig 1 | - - - | - - - | 0 | 65 |
| VIP1-1A-10 | 10A | <0.5mA | Fig 2 | Fig 1 | - - - | 0 | - - - | 75 |
| VIP4-1B-06 | 6A | <1.0mA | Fig 3/Fig4 | Fig 2 | M4 | 0 | - - - | 140 |
| VIP4-1B-10 | 10A | <1.0mA | Fig 3/Fig4 | Fig 2 | M4 | 0 | - - - | 170 |
| VIP4-1B-20 | 20A | <1.0mA | Fig 3/Fig4 | Fig 2 | M4 | 0 | - - - | 170 |
| VIP4-1B-30 | 30A | <1.0mA | Fig 5 | Fig 2 | M6 | - - - | - - - | 320 |
| VIP4-1B-50 | SOA | <2.0mA | Fig 5 | Fig 2 | M6 | - - - | - - - | 600 |
| VIP4-1B-100 | 100A | <2.0mA | Fig 5 | Fig 2 | M8 | - - - | - - - | 1380 |
| VIP4-1B-150 | 150A | <2.0mA | Fig 5 | Fig 2 | M10 | - - - | - - - | 1900 |
| VIP4-1B-200 | 200A | <2.0mA | Fig 5 | Fig 2 | M10 | - - - | - - - | 1900 |
Sample
Sample Fee: Negotiate
Sample Time: 2~5 days
Payment
---Payment terms: Western Union, T/T
---Please remember to leave the correct contact information for
delivery.
FAQ
About VIIP
Q:Are you manafacturer or trading company?
Shenzhen VIIP is a manafacturer forEMI/EMC Products located in
Shenzhen Guangdong China.
About Products
Q:What certification do you have for your products?
We have got CE ROHS FCC and so on.
Q:What is your MOQ?
It depends on different items,we have low MOQ request ,because we
have a big warehouse for stock orders.
Q:What shipping ways do you support for delivery?
We support air, sea and railway shipment.
About Sample Order
Q: Can I have a sample order for your products?
A: Yes, we offer product samples, including mixed samples.
About Service
Q: Which payments are acceptable?
A:We accept T/T, Paypal, Western Union ect.
Q: Can I visit your company and factory in China?
A: Sure. We are happy to receive you in Shenzhen, China and show
you around our workplaces.
EMI Filters and RFI Filters - Single Phase
VIIP’s single phase industrial EMI filters and RFI filters
attenuate electrical noise generated from industrial,
telecommunication, commercial, military and medical electrical and
electronic equipment.
These EMI & RFI filters attenuate mains-borne electromagnetic
interference from 100 kHz upwards to very high frequencies. VIIP's
EMI filters and RFI filters are used to bring electrical and
electronic products into compliance with National (FCC) and
International EMC standards, such as CE, VDE and others.
These EMI & RFI filters also protect the sensitive electronic
circuits in the equipment from extraneous surges, spikes, ESD, and
interference in the environment. The filters are available off-the-
shelf from 1 A to 100 A.
However, these designs can be easily modified to meet your specific
high current needs up to 1,000 A.
Please contact US for your special needs.
